T R A C K       P A P E R
ISSN:2394-3661 | Crossref DOI | SJIF: 5.138 | PIF: 3.854

International Journal of Engineering and Applied Sciences

(An ISO 9001:2008 Certified Online and Print Journal)

Approximation Method of Tool Path Oriented to Five-axis CNC Machining with NURBS Curve

( Volume 6 Issue 9,September 2019 ) OPEN ACCESS
Author(s):

Chen Liangji, Li Huiying

Abstract:

For the case of the advancement of Non-Uniform Rational B-Spline (NURBS) curve to represent a complex freeform shape, the NURBS method has been applied in Computer Numerical Control (CNC) machine tools to express the tool path curve. In order to achieve higher approximation accuracy in five-axis CNC machining, the approximation principle was firstly proposed based on the time division and the tool path curve was approximated by a group of chord lines. To avoid the federate fluctuation, the federate correction method is also proposed. The relation methods for realizing the approximation of tool path curve was also presented in this paper. The given example and the cutting result show that the proposed methods are feasibility of being applied to CNC trajectory approximation to achieve high-speed and high-accuracy multi-axis machining.

DOI DOI :

https://dx.doi.org/10.31873/IJEAS.6.9.08

Paper Statistics:

Total View : 601 | Downloads : 592 | Page No: 8-13 |

Cite this Article:
Click here to get all Styles of Citation using DOI of the article.