T R A C K       P A P E R
ISSN:2394-3661 | Crossref DOI | SJIF: 5.138 | PIF: 3.854

International Journal of Engineering and Applied Sciences

(An ISO 9001:2008 Certified Online and Print Journal)

Improving Strength of the ABS 3D-Print Using RSM

( Volume 9 Issue 4,April 2022 ) OPEN ACCESS
Author(s):

Er. Sandeep Chowdhry

Keywords:

Fusion Deposition Method, Response surface Method, 3D Print strength, ABS Plus.

Abstract:

Rapid Prototyping technology is instrumental in building prototypes for new product development. However, the default settings of the 3D printer process parameters, in some cases, do not provide the required strength for the 3D print. There are several process parameters to be considered. This study aims to find the relationship between the infill density and the layer thickness as they affect the strength of the 3D print. Online Cura software is used to slice the specimen. Response Surface Method is used to analyse the data. The results show infill density, layer thickness, and interaction between infill density and layer thickness are significant at α = 0.05. It is concluded that there is a non-linear relationship between the infill density and the layer thickness.

DOI DOI :

https://dx.doi.org/10.31873/IJEAS.9.04.03

Paper Statistics:

Total View : 356 | Downloads : 347 | Page No: 6-8 |

Cite this Article:
Click here to get all Styles of Citation using DOI of the article.